ProLiant Servers - Netservers

HPE Proliant Microserver Gen10 Plus - Compatible GPUs

 
Derrickpjh999
Occasional Visitor

HPE Proliant Microserver Gen10 Plus - Compatible GPUs

Hi, I currently have a unit of the microserver gen10 plus, currently running on Ubuntun LTS 18.04. I have tried to install a Tesla T4 NVIDIA GPU into the microserver. When I run the command lspci, it is able to detect the GPU as a 3D controller in the PCI slot. However it is not able to connect to the nvidia driver and would always get this message:

NVIDIA-SMI has failed because it couldn’t communicate with the NVIDIA driver

Stuffs that I have tried:

  • Updating the kernel to 5.X
  • Updating the System Rom /BIOS to the latest version - U48
  • Checked that secure boot is disabled
  • Checked for "4G decoding" in the BIOS but it is not available in the BIOS

Does anyone have a list of supported GPUs specifically for this server so that I can make a separate GPU purchase, or knows if the NVIDIA T4 GPU is compatible for this microserver, or knows the necessary steps required to allow the T4 GPU to run on this server. Thanks

3 REPLIES 3
support_s
System Recommended

Query: HPE Proliant Microserver Gen10 Plus - Compatible GPUs

System recommended content:

1. HPE ProLiant MicroServer Gen10 Plus

2. HPE ProLiant MicroServer Gen10 Plus User Guide

 

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

 

Thank you for being a HPE valuable community member.


Accept or Kudo

Derrickpjh999
Occasional Visitor

Re: Query: HPE Proliant Microserver Gen10 Plus - Compatible GPUs


@support_s wrote:

System recommended content:

1. HPE ProLiant MicroServer Gen10 Plus

2. HPE ProLiant MicroServer Gen10 Plus User Guide

 

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

 

Thank you for being a HPE valuable community member.





This does not answer the question posted. I have read the documents related to the microserver and found no content about compatible gpus

Ihaqueit
Trusted Contributor

Re: HPE Proliant Microserver Gen10 Plus - Compatible GPUs

1. MicroServer Gen10 has inbuilt one display port 1.2 which supports 1080p resolution at 144Hz .

2. HPE AMD Radeon Pro WX2100 Graphics Accelerator ( Part No. Q1P47A ) can also be used for this server for exceptional compute performance handling of a variety of workloads
It adds additional graphics power to the native capability of the server as well as providing additional 2 mini-DisplayPort and 1 DisplayPort™ 1.4.

I Haq