How To Configure ILO Common Name by Script

[Paul Hill_4]

I would like to know how to configure a HP ILO board's CommonName field using a script.

I want to be able to give an ILO a Common Name of say "ILO1.test.local"

I can then run a script to generate a certificate request (CSR)
(E.G CPQLOCFG -f Cert_Request.xml etc etc)

The CSR is then submited to a Certificate Authorty and a Certificate is issued.
I want the certificate that is issued to have
ILO1.test.local in its Subject Field and nothing else.

[Pieter 't Hart]

You allready use ccpqlocfg.

HP Integrated Lights-Out Management Processor
Scripting and Command Line Resource Guide
might be of help.

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00294268/c00294268.pdf?jumpid=reg_R1002_USEN

Example: