ProLiant Servers - Netservers

How to configure ilo on ml350 g5

 
Kashif ali
New Member

How to configure ilo on ml350 g5

We have purchased a new ml350 g5 server and i want to use ilo but i don't have any clue where to start from.
Any help will be appreciated

Regards,
Kashif
1 REPLY 1
Rohan McN
New Member

Re: How to configure ilo on ml350 g5

When you boot the server an option "F8" to configure ILO should appear as the BIOS etc boots up (its usually just before the arrays cards etc intialise). Use this utility to set an IP address, Subnet Mask, etc and to modify the user name/password.

If the ILO on the ML350 supports shared port access, we have always found it works when you have the NIC plugged into PORT 1.