ProLiant Servers - Netservers

IP Teaming on a DL380

 
DJ Boyce
New Member

IP Teaming on a DL380

Ive been unable to setup any network teams on my server, ive followed all of the step by step guides and every time i get an error message saying that the machine is unable to set-up the team..

Ive been able to setup network teams on the ML370, any ideas why the same wont work for the DL380?
4 REPLIES 4
Prem Selvam Arumugam
Trusted Contributor

Re: IP Teaming on a DL380

Post the Screen Shot,

Please ensure that you can perform Network Bridge using windows option.

If it happens then the error would be on HP Network Teaming App. If it fails the Error is with either the tcp/ip stack or the network driver or the irq.
DJ Boyce
New Member

Re: IP Teaming on a DL380

what would you like a screen print of? the error message?

if so it doesnt say any more than what i've already put.

we have now updated all our drivers and s/w but are still not having any success...
Prem Selvam Arumugam
Trusted Contributor

Re: IP Teaming on a DL380

Have you tried network bridge in Windows?
Check this option to isolate the problem.

Also Try giving two different stactic IP's on each Physical network port and third IP to the Teamed connection.

Ensure you donot enter Default gateway or DNS entries in Network connection 1 & 2 (Only the IP address and Subnet to be mentioned)

The third teamed connection can carry all the details.
SteveR22
Advisor

Re: IP Teaming on a DL380

Have you checked whether the nics are compatible with the HP teaming software and with the version of the s/w that you are using? Try downgrading the ver of the teaming s/w