Intelligent Provisioning F10 not working now

[chencham]

 Intelligent Provisioning  F10 not working now

so i tried  to using  " Intelligent Provisioning  recovery media 1..63 "   recovery my microserver gen 8.  But did not succeed.

Please could somebody help me??

Here is screenshot from my server.

[Jimmy Vance]

Verify the md5sum that you have good media.  You should be able to boot the ISO image itelf over iLO (if you have the advanced license) or you can create a bootable DVD from teh ISO.  I've used this iamge numerous times on many different Gen8 server models to update to the latest version

http://h20566.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_c02fd94d9eba4d52a2cc30b34e

[chencham]

Thanks for your response，

1. check with MD5 the media is fine，please see attachment MD5.png

2. I reset NVRAM already，an error occurred during  recovery  'ERROR flashing the NVRAM' ，please see attachment error.png

Could you help me how to fix 'error flashing the NVRAM' ?

[Torsten.]

Maybe you need to format the NAND flash first,

Have a look:

http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c04996097

[chencham]

Torsten:

   Thank you very much:

1. follow HP doc  using the HP Lights-Out Configuration Utility run XML  script  is ok, As you can see below, log

Server IP is : 192.168.123.116:443
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
    STATUS="0x0000"
    MESSAGE='No error'
     />
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
    STATUS="0x0000"
    MESSAGE='No error'
     />
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
    STATUS="0x0000"
    MESSAGE='No error'
     />
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
    STATUS="0x0000"
    MESSAGE='Forcing a format of the partition after the iLO reset.'
     />
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
    STATUS="0x0000"
    MESSAGE='No error'
     />
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
    STATUS="0x0000"
    MESSAGE='No error'
     />
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
    STATUS="0x0000"
    MESSAGE='No error'
     />
</RIBCL>


Script succeeded for IP:192.168.123.116:443

2. But  in the iLO Event Log showing log message:

411 
11/30/2016 06:45 11/30/2016 06:45 1 Embedded Flash/SD-CARD: Embedded media manager failed initialization. 
410 
11/30/2016 06:45 11/30/2016 06:45 1 REST API Warning: REST API memory cleared (SCHEMA_PROV_ID master storage file set to default. Reboot system.). 
409 
11/30/2016 06:43 11/30/2016 06:43 1 Embedded Flash/SD-CARD: Blob store file system is inconsistent. It will be reinitialized on the next iLO reset and unavaila. 

iLO Self-Test Results
Embedded Flash/SD-CARD Controller firmware revision 2.10.00 Embedded media manager encountered SL_AbortHandler during init 
CPLD - PAL0 ProLiant MicroServer Gen8 System Programmable Logic Device version 0x06 

Could you help me how to fix "Embedded media manager failed initialization" ?

Thanks again for your kind help

[Torsten.]

Is ILO already at version 2.50?

See

http://h20566.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=5177957&docLocale=en_US&docId=emr_na-c03874400

[chencham]

YES ILO already at version 2.50

iLO Self-Test Results
Embedded Flash/SD-CARD  Controller firmware revision 2.10.00 Embedded media manager encountered SL_AbortHandler during init  
CPLD - PAL0  ProLiant MicroServer Gen8 System Programmable Logic Device version 0x06  

Information

Server Name  Host is unnamed 
Product Name ProLiant MicroServer Gen8 
System ROM J06 11/02/2015 
System ROM Date 11/02/2015 
Backup System ROM J06 11/02/2015 
Integrated Remote Console .NET    Java Web Start    Java Applet  
License Type iLO Advanced 
iLO Firmware Version  2.50 Sep 23 2016 
IP Address 192.168.123.116 

[chencham]

 Please could somebody help me??

[spgsitsupport]

Same here (Microserver Gen8, iLO4 2.50), followed:

http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c04996097

made NO difference.

All I get in log is:
Embedded Flash/SD-CARD: Failed restart.
Embedded Flash/SD-CARD: Embedded media manager failed initialization.REST API Warning: REST API memory cleared (SCHEMA_PROV_ID master storage file set to default. Reboot system.).

Do NOT care about F10 IP (as will never use it), but would like NO error

[sphynx]

Same problem here!! 

When I press F10 to "Intelligent Provissioning" I'm stuck on display with GRUB prompt. 

ProLiant DL320e Gen8 v2

When I check on iLO, Firmware Version Info: Intelligent Provissioning = N/A

Are you guys has the same result? I also have "Embedded Flash/SD-CARD: Embedded media manager failed initialization" error.