ProLiant Servers - Netservers
1748211 Members
4690 Online
108759 Solutions
New Discussion

Intelligent Provisioning

 
Fademidun
Occasional Visitor

Intelligent Provisioning

Hello,

 

I need serious help. I was going through the intelligent Provisioning futures on one of the servers already installed with ESXi on a USB on the system  and mistakenlly disabled the software option and another options (i think it's the disk) to none, now, when the server reboot, all the devices are no longer recognised. Can't boot to any OS even changing the boot option via iLO to boot from USB, keyboard no longer responds to any key - F9, F10, or even F11. How can I restore this? Please help

 

 

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: Intelligent Provisioning

Reset all BIOS settings to default by using the maintenance switch on the board.

 

You did not mention the server model ...


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Fademidun
Occasional Visitor

Re: Intelligent Provisioning

Hi Torsten,

 

Many thanks for replying. I managed to resolved it by resetting the the iLO via iLO Diagnostics menu. All devices became active and now working fine

 

The model is MicroServer G8

 

Thanks