Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

Intelligent Provisioning

Fademidun
Occasional Visitor

Intelligent Provisioning

Hello,

 

I need serious help. I was going through the intelligent Provisioning futures on one of the servers already installed with ESXi on a USB on the system  and mistakenlly disabled the software option and another options (i think it's the disk) to none, now, when the server reboot, all the devices are no longer recognised. Can't boot to any OS even changing the boot option via iLO to boot from USB, keyboard no longer responds to any key - F9, F10, or even F11. How can I restore this? Please help

 

 

2 REPLIES
Torsten.
Acclaimed Contributor

Re: Intelligent Provisioning

Reset all BIOS settings to default by using the maintenance switch on the board.

 

You did not mention the server model ...


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Fademidun
Occasional Visitor

Re: Intelligent Provisioning

Hi Torsten,

 

Many thanks for replying. I managed to resolved it by resetting the the iLO via iLO Diagnostics menu. All devices became active and now working fine

 

The model is MicroServer G8

 

Thanks