ProLiant Servers - Netservers

Keeps Rebooting After Disk Upgrade

Occasional Contributor

Keeps Rebooting After Disk Upgrade

I am building a new W2K3 server on a Proliant ML350 G4P.

Everything was going fine until I converted the W2K3 disk from Basic to Dynamic, now all the server does is continually reboot.

It has 3, 72GB disks in a RAID 5 config on a 642 smart array controller. It also has an Ultrium tape drive connected to port 1 on the onboard 320 HBA. It also has 4GB of RAM.

I updated the system BIOS to the latest version, but it still continues to reboot over and over and over.

Any help greatly appreciated.