ProLiant Servers - Netservers

ML 330 G2 - Raid LC2 Controller not recognized in Array Manager

 
Taus
Occasional Contributor

ML 330 G2 - Raid LC2 Controller not recognized in Array Manager

I downloaded the recent array managing tool from HP but the controller is not being recognized. Both HDs are connected to it via one ribbon. Any thoughts?
2 REPLIES 2
El.Magnifico
Frequent Advisor

Re: ML 330 G2 - Raid LC2 Controller not recognized in Array Manager

Hi.

I'm not sure if the recent ACU supports this older controller, try configuring it with SmartStart-CD.

Version 5.5 (the latest one for the older CPQ ProLiants)can be found here:
http://h18023.www1.hp.com/support/files/server/us/download/22678.html

HTH

Michael
El.Magnifico
Frequent Advisor

Re: ML 330 G2 - Raid LC2 Controller not recognized in Array Manager

Sorry, I confounded the controller.

QuickSpecs

http://h18000.www1.hp.com/products/quickspecs/10652_div/10652_div.HTML

says, configuration of the LC2 is done by "Options ROM Configuration for Arrays (ORCA) utility Insight Manager (IM)".

Do you have any message of the controller while booting the server?
Is there the possibility to press "F8" when the controller initializes?

Regarding FAQ

http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/raidlc2/questionsanswers.html?jumpid=reg_R1002_USEN

of this controller, ACU is not supported:

Q12. What configuration utilities and management utilities are available for the RAID LC2 Controller?
A12. The RAID LC2 Controller can be configured using Option ROM Configuration for Arrays (ORCA) utility and managed using Insight Manager (IM).

Sorry for giving wrong hints in the first post.

Michael