HPE Community
ProLiant Servers - Netservers
1753820 Members
8887 Online
108805 Solutions
New Discussion юеВ

ML 350 on every power on memory must be reseated

 
dusan marjanovic
Occasional Contributor

тАО09-21-2008 11:55 PM

тАО09-21-2008 11:55 PM

ML 350 on every power on memory must be reseated

I have to change the positions of memory dimms every time i turn off/on server. Do you have any idea what can be the problem?
0 Kudos
Reply
2 REPLIES 2
JUAN MONTES
New Member

тАО12-24-2008 07:06 AM

тАО12-24-2008 07:06 AM

Re: ML 350 on every power on memory must be reseated

verifique que el primer slot contenga una memoria HP. esto deberia solucionar el problema
0 Kudos
Reply
Prem Selvam Arumugam
Trusted Contributor

тАО12-26-2008 10:04 AM

тАО12-26-2008 10:04 AM

Re: ML 350 on every power on memory must be reseated

Dusan,

Ensure whether you have populated it properly.

* Install RAMS in pair
* Pairs sould be identical in Size and Brand
* First pair in Slots Marked as A and Second Pair in Slots marked as B and so on.

After all if still problem persist, then one of you RAM Chip is defective

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.