ProLiant Servers - Netservers

ML110 & Windows Server 2008 x64

 
All I.T. Solutions
Occasional Contributor

ML110 & Windows Server 2008 x64

Hello,
I'm just about to buy the following...(I can't tell what gen the server is though):

HP ML110T05 3065 NHP-SATA
PI DATE: DECEMBER 2007
FORM FACTOR: 4U Micro ATX Tower
PROC : Intel Xeon 3065 Dual Core 2.33GHz, 1333MHz FSB, 4MB L2 cache
CHIPSET : Intel 3200 Chipset
MEM : 512MB PC2-6400 800MHz Unbuffered DDR2 ECC (Max upto 8GB)
HDD : 160GB 7,200 rpm SATA Hard Drive
DRIVE BAYS : 4x 3.5" Non Hot Plug SATA
DRIVE : 16X SATA DVD-ROM drive
INT STORAGE: SUPPORTS MAXIMUM 2TB (4x 500GB) SATA
GRAPHICS : Intg graphics controller with 8MB video Mem supporting
1600 x 1200 & 16-bit Col Res
NTWK : Embedded NC105i PCIe Gigabit Svr Adaptor
CONTROLLER : 6-port SATA controller with embedded RAID (RAID, 0,1, 1+0 on
Motherboard)
PORTS : Serial, 2 PS/2 (Mouse, Keyboard), 1 Graphics, 8 USB (4 Rear,
2 Front, 2 Internal (1 for USB Tape connectivity)), 1 RJ-45
EXP SLOTS : Slot 1: 32-bit/33MHz PCI at 3.3V slot
Slot 2, 3: PCI-Express x8 conn with x1 link
Slot 4: PCI-Express X8 conn with x8 link
OS SUPP : Win 2003/2003 R2 Web, Win 2003/2003 R2 SBE, Win 2003/2003 R2
Std (x86 & x64), Win 2003/2003 R2 Entp (x86 & x64),
Red Hat Entp Linux 5 Update 1 (x86 & x64),
SLES 10 SP1 (x86 & x64), Netware 6.5 SP7
------
Does anyone know for starters what gen this is - I'm thinking 4 but I'd also like to know if this should work with Windows server 2008.

Any ideas?

Thanks
Regards
Anthony