ProLiant Servers - Netservers
1748242 Members
4219 Online
108760 Solutions
New Discussion юеВ

Re: ML150 G6 - additional non hot swap drive cage

 
jbainbridge
Advisor

ML150 G6 - additional non hot swap drive cage

We don't need (and can't afford!) hot swap ... is it possible to add more than 4 standard hard drives to this server?

Looking at the details I presume I'd need an additional cage to mount the drives. I've been through the quickspecs but can't see any reference to it.

Thanks,

James.
2 REPLIES 2
Prem Selvam Arumugam
Trusted Contributor

Re: ML150 G6 - additional non hot swap drive cage

Hi, James

Yes you can! Check page 12 of the pdf docu from below link.

http://h18004.www1.hp.com/products/quickspecs/13249_na/13249_na.pdf

Order the base model and add the required HDD's


Drive Cage should be

NHP HDD model: Non-hot plug hard disk drive cage FIO kit
NOTE: If non-hot plug drive cage is selected, then at least one non-hot plug SATA or
SAS hard drive must be selected.
NOTE: Non-hot plug drive cage only supports non-hot plug drives.
500448-B21


HDD's Should be one among this

SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
HP 400GB 3G 10K 3.5" DP SAS ENT HDD 508232-B21
HP 450GB 3G 15K 3.5" DP SAS ENT HDD 454234-B21
HP 300GB 3G 15K 3.5" DP SAS ENT HDD 417950-B21
HP 146GB 3G 15K 3.5" DP SAS ENT HDD 417855-B21
jbainbridge
Advisor

Re: ML150 G6 - additional non hot swap drive cage

Thanks for your reply.

Searching on the part no. ... it appears to be 'factory integrated' and not in stock anywhere.

What does this mean?

Thanks,

James.