ProLiant Servers - Netservers

ML150 Gs - very very long boot time and no result

 
ghyslain
New Member

ML150 Gs - very very long boot time and no result

We just bought a brand new ML150 G2 with 3x250Gb SATA , 3Gb memory, and extra NIC card.

When i boot, diagnostic finds everything(after some time) and gives a OK for everything.
But i want to boot from DVD to install Suse Linux Enterprise server 10.1 .
It sticks at Broadcom UNDI PXE-2.1 v.7.6.3 and gives media test failure check cable, exiting broadcom PXE ROM. OS not found.

Am i doing something wrong here? i did some changes to the BIOS like disable the SERIAL port, and changing boot order.
I also installed a DVD burner(brand new too) with the included CD rom, and changed from cable select to DVD master and CD slave.

can't figure out what is wrong here.
thanks in advance for your kind help.
1 REPLY 1
sandeep_raman
Honored Contributor

Re: ML150 Gs - very very long boot time and no result

Hello ghyslain,

Try resetting the BIOS. Perhaps its trying to do a PXE boot after not finding the correct boot controller.

SRH