ProLiant Servers - Netservers

ML150 & Linux RHEL 4 & SATA

 
Thomas Goujon
New Member

ML150 & Linux RHEL 4 & SATA

Hello,
I try to install RHEL 4 and I need Embedded SATA controler drivers ml150rhel4sata-6.00.080-1.img. Linux install begin and I enter "linux dd" after the boot. Then Linux no reconize the hard disk and I try to select the driver but the system want.
Ok bad but I continue the install and after the choice language Linux don't find the Controler and the hard disk and reboot.
How can I do THIS INSTALL ? Thank you about your help.
3 REPLIES 3
Pau Garcia i Quiles
Frequent Advisor

Re: ML150 & Linux RHEL 4 & SATA

Have you loaded the drivers?

The easies you can do is boot with RHEL4 as usually (no "linux dd"). There's a step in RHEL4 installation to load drivers.
Thomas Goujon
New Member

Re: ML150 & Linux RHEL 4 & SATA

yes the computer load the driver from diskette and the install continue.
But the system doesn't detect the hard drive.
I try to load the drivers from the list (on this step I tried to load with F2) and I choice "Adaptec SATA.." (aac8130). But the system load nothing. I try to load another one (the first from the list for example) and the system load it. I don't understand. Does exist another driver for this controler ? Where can I load it ?
Thomas Goujon
New Member

Re: ML150 & Linux RHEL 4 & SATA

I installed RHEL4 in the ML150 server (SATA contoler). I find a new driver in the HP web site at this address http://h18000.www1.hp.com/support/files/server/us/download/24210.html .
The system load the driver aar81xx, it's Successfull !
Thank you about your help