ProLiant Servers - Netservers

ML330 G2 IDE HDD Upgrade 80 to ?

 
Bernd Wrana
Occasional Contributor

ML330 G2 IDE HDD Upgrade 80 to ?

Hello

We are using a ML330G2 with two 80 GB IDE-HDD in a RAID-1 configuration. The OS is Netware 6 SP5. Now I want to upgrade the HDDs. Is this possible? I mean, is this supported from hp, netware? I want to upgrade to 160 GB.
2 REPLIES 2
Brandon Gomer
New Member

Re: ML330 G2 IDE HDD Upgrade 80 to ?

Bernd -

The MegaRaid controller in the ml330 G2 will not recognize a hard drive capacity greater than 137GB. I found this out as I was upgrading Netware 6.0 to SP5.

I have also had the same failure you discussed in your previous posting, where both drives showed as REBUILDING. I am still trying to get my ML330 to run with NW6.0SP5. I contacted LSI Logic, and the person I talked to was not as helpful as the person you talked to, and would not send me the dos based configuration tool. Can you please email that tool to me? Please?

Thanks,
Brandon
Bernd Wrana
Occasional Contributor

Re: ML330 G2 IDE HDD Upgrade 80 to ?

Hello

No Problem. Please send me an email to bwranagmx.de

Then I will send you the tools.