HPE Community
ProLiant Servers - Netservers
1753318 Members
7317 Online
108792 Solutions
New Discussion

Re: ML330 with NT

 
SOLVED
Go to solution
CA1105936
New Member

‎03-25-2004 12:44 AM

‎03-25-2004 12:44 AM

ML330 with NT

I have a Compaq ML330 with NT4.0 loaded. I want to remove NT and install Windows 2000 Professional and use the machine as a workstation. Whenever I boot the Windows 2000 CD, I get an error message that no drives are configured. How do I configure the SCSI drive so Windows 2000 can recognize?
0 Kudos
Reply
1 REPLY 1
BR777559
Occasional Advisor

‎03-26-2004 05:33 AM

‎03-26-2004 05:33 AM

Solution

Re: ML330 with NT

You will have to get the drivers for the array controller off the web, and press F6 as Windows boots this will allow you to install a Third party device driver, this should be on a floppy you created from the driver pack downloaded.
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.