ML350 (G1, 1Ghz), ML370 (G1, 667Mhz)

[Jeroen Eeuwes]

Hi,

I've got two (old) Proliant servers. I've downloaded the firmware maintenance CD release 7.50. If i try to boot form the CD both servers show a message saying that this server is not supported by this CD and that I can check on the support matrix to find out more.

So I took another look at the support matrix (see: http://h18000.www1.hp.com/support/files/server/us/cd_supportinfo/FirmwareCD.pdf )

As far as I can tell both servers should be supported by this CD. What am I missing?

[Robert]

The support pack you need is 5.5 - Here's the site for downloading just about everything you need for those systems. Make sure you check what cards you're using.

Although I've not used 2003 server with ours, only 2000, there's a selection for that one. Good Luck.

http://h18023.www1.hp.com/support/files/server/us/download/22678.html

[Robert]

Here's the main link: http://h18023.www1.hp.com/support/files/server/us/family/model/1120.html?lang=en&cc=us&prodSeriesId=327479

[Jeroen Eeuwes]

Thanks for the SmartPack link. That one isn' listed in the downloads. If you follow your link and pick a operating system it does show the 7.50 Firmware -CD. So I'm still wondering why I can't use it.