HPE Community
ProLiant Servers - Netservers
1752786 Members
5903 Online
108789 Solutions
New Discussion

ML350 G4 DLT streamer not recognized

 
CA1282933
New Member

‎05-21-2005 09:06 AM

‎05-21-2005 09:06 AM

ML350 G4 DLT streamer not recognized

Hi,
I have a brand new ML350 G4 server with 641 array controller. 3 disks in RAID5 are working fine.
Now I would like to add a DLT VS80 streamer on the onboard SCSI channel 0
This is not recognized by the system.
Streamer has SCSI id 0
It is connected via a SCSI320 cable.
Thanks for any suggestions
Krist
0 Kudos
Reply
1 REPLY 1
CA838674
Frequent Advisor

‎05-21-2005 07:59 PM

‎05-21-2005 07:59 PM

Re: ML350 G4 DLT streamer not recognized

Don't use 0 or 1 as SCSI number for Streamers.
Try 3 and check proper termination (Use Bus 1 if possible or better a dedicated card)
It Consultant
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.