ProLiant Servers - Netservers

ML350 G5 ADU error

 
Tom grigsby
New Member

ML350 G5 ADU error

Getting the following error and not sure how to fix it.

Smart Array E200i in slot 0 : Device Error Report

Device Severity Error
--------------- -------- ----------------------------
Logical Drive 1 Critical Parity Initialization Failed


Smart Array E200i in slot 0 : Identify Controller

Configured Logical Drives 1 (0x01)
Configuration Signature 0xabeece5e
RAM Firmware Revision 1.84
ROM Firmware Revision 1.84
Hardware Revision 0x00
Boot Block Revision 1.84
Drive Present Map 0x00000000
External Drive Map 0x00000000
Board ID 0x3211103c
Swapped Cable Flags 0x00
Non Disk Map 0x00000000
Bad Host RAM Addr 0x00
CPU Revision 0x00
PDPI Revision 0x00
EPIC Revision 0x00
WCXC Revision 0x00
Marketing Revision A
Controller Flags Controller Flag
3 REPLIES 3
Thomas Dertz
New Member

Re: ML350 G5 ADU error

I had the same problem and it was because of an old adu version. install the newest ADU 8.35.7.0 that must fix it.
Tom grigsby
New Member

Re: ML350 G5 ADU error

Thanks I'll give it a try.

Tom
Tom grigsby
New Member

Re: ML350 G5 ADU error

It's fixed, Thanks.