HPE Community
ProLiant Servers - Netservers
1752579 Members
2949 Online
108788 Solutions
New Discussion

Re: ML350 G5 + SCO OpenServer 5.0.7 (hpsas)

 
Luis Gómez
Contributor

‎09-13-2007 07:37 PM

‎09-13-2007 07:37 PM

ML350 G5 + SCO OpenServer 5.0.7 (hpsas)

I have a ML350 G5 with e210i SAS raid controller and 3 x 146 Gb RAID5 disks.

I can install SCO OpenServer 5.0.7 with hpsas BTLD driver (from EFS 5.770a) but it only see a 19 Gb disk instead 280 Gb.

When SCO boot show the following information:

%disk type=S ha=0 id=0 lun=0 bus=0 ht=hpsas unit=0
%Sdsk cyls=4729 hds=255 Secs=32 unit=0 fts=stdb
%Sdsk-0 Vnd=HP Prd=LOGICAL VOLUME Rev=1.66
0 Kudos
Reply
1 REPLY 1
Luis Gómez
Contributor

‎09-13-2007 07:41 PM

‎09-13-2007 07:41 PM

Re: ML350 G5 + SCO OpenServer 5.0.7 (hpsas)

Sorry, the HP SAS raid controller is E200i
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.