ProLiant Servers - Netservers

ML350 Stops on Press Ctrl -S

 
ngako
Occasional Contributor

ML350 Stops on Press Ctrl -S

Please, I need help booting my Proliant ML 350. Each time I boot the machine it hangs up at where you have HP Ethernet Boot Agent V6.2.11, PRESS CTRL-S to enter Configuration Menu and does not go any further.
If anyone has encountered and solve a simillar issue pls, I need your help to get to my OS (WIN2K server).

Thanks in advance for asisstance.
3 REPLIES 3
divakar.k
Valued Contributor

Re: ML350 Stops on Press Ctrl -S

1)Disable PXE through RBSU
2)Also check for the Boot order in RBSU
3)The problem could also be due to the LAN adapter ( If it is not functioning)

i hope this helps you
RaMpaNTe
Trusted Contributor

Re: ML350 Stops on Press Ctrl -S

Also you can try this, go ahead and clear NVRAM, make sure you don't select clear NVRAM-boot disk.

If that resolves the issue then you can go ahead and update the Server BIOS from
http://h18023.www1.hp.com/support/files/server/us/index.html

Chill
RaMpaNTe
You heve a question... I have an aswer!!!
ben peacock
New Member

Re: ML350 Stops on Press Ctrl -S

Hello
I have a DL385 that I am getting the same issue with, how do you run the RSBU if you can't progress far enough to boot off a CD also have the same problem trying to flash the NVRAM as I can't get into the BIOS?
Do you use the jumpers on the system board to reset the NVRAM?
Thanks
Ben