ProLiant Servers - Netservers
1753500 Members
4234 Online
108794 Solutions
New Discussion юеВ

Re: ML350 server unable to boot up

 
Pei Ee Loh
New Member

ML350 server unable to boot up

Anybody encountered this problem before? After that, error message "ROM Redundancy Detected. 1615-Power Supply Failure or Power Supply Unplugged" appears. Then it will proceed to perform Multi Initiator Configuration which is the part that the system hanged.
4 REPLIES 4
CA1313024
New Member

Re: ML350 server unable to boot up

"redundant rom detected" is not an error message . it just shows that we have a backup rom in place.
The Error 1615 is realted to PSU.

Reseat your power supply firmly
Check the Health LED status on the front of server
If you have redundant PSUs.. try with either of the PSUs in the primary slot.
Pei Ee Loh
New Member

Re: ML350 server unable to boot up

Thanks! Have confirmed that it's not the power supply problem. Think most prob it's due to scsi card error now.
ANTMan
Visitor

Re: ML350 server unable to boot up

I am having this issue with an ML350 G2. I have removed the bad PSU and it still hangs when performing MIC.
Any idea what the issue may be?
Prem Selvam Arumugam
Trusted Contributor

Re: ML350 server unable to boot up

Try resetting all the components

Hum G2 was suggested to work stable than G3.