ProLiant Servers - Netservers

ML370G3 UnixWare 7.1.4 Panic on boot

 
David Nash
Occasional Contributor

ML370G3 UnixWare 7.1.4 Panic on boot

I get random panics when booting the above server. I have a SmartArray 642 RAID card, with a RAID 5 logical drive. I also have an external DLT VS80 drive connected to the on-board SCSI port. The server worked fine when it was running UnixWare 7.1.3 but since doing an upgrade-in-place, when I re-boot, it's a bit hit and miss as to whether or not it will panic. Sometimes it boots fine, other times it may take up to three attempts.

I've updated the server to the latest firmware using the firmware maintenance 'CD' that I downloaded.

I think it's related to the adst70 or ciss drivers. Looking in the UnixWare packages, I'm running:

adst70 7.1.3b
ciss 7.62a

Are there known issues with these, and if so, where can I find updated versions? My UnixWare installation is on Maintenance Pack 2. I think that when I updated there were references to adst70, but I can't find any reference to them, and I must confess I can't remember if I updated the driver or if I retained the existing one!

David