ProLiant Servers - Netservers
1748000 Members
4947 Online
108757 Solutions
New Discussion юеВ

Re: MicroServer Gen 8 embedded SD failure

 
Chris1983
Occasional Visitor

MicroServer Gen 8 embedded SD failure

Morning all sorry if this has been answered before. My server has the iLO NAND failure, I have tried updating the firmware and several format attempts but isnтАЩt working. I want to set up a RAID 1 array, is there any way of doing this without Inteligent Provisioning? Or is the motherboard only good for the bin?

Thanks Chris
2 REPLIES 2
Jimmy Vance
HPE Pro

Re: MicroServer Gen 8 embedded SD failure

I don't recall if you can access the RAID setting in RBSU on the Gen8 Microserver, and I don't have one handy to look at.   This Customer Advisory explains how to format the NAND which should allow you to reload Intelligent Provisioning

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04996097

SUPPORT COMMUNICATION - CUSTOMER ADVISORY
Document ID: c04996097

Version: 10

Advisory: (Revision) HPE Integrated Lights-Out 4 (iLO 4) - HPE Active Health System (AHS) Logs and HPE OneView Profiles May Be Unavailable Causing iLO Self-Test Error 8192, Embedded Media Manager and Other Errors

No support by private messages. Please ask the forum! 
Jimmy Vance
HPE Pro

Re: MicroServer Gen 8 embedded SD failure

There is also an offline version of HPE SSA you can boot into to access the B120i settings

No support by private messages. Please ask the forum!