ProLiant Servers - Netservers

Microserver Gen10, SATA driver and Windows 2012 R2

 
Ovlovman
New Member

Microserver Gen10, SATA driver and Windows 2012 R2

Hi,

Hoping someone can help me!

I have just bought a MicroServer Gen10 to use as a branch server, small office with 3 users. 

Installed a couple of 4tb disks and configured the Marvell controller to treat them as a R1 pair.

Have come to install Window 2012 R2, and it stops asking for a driver for the raid controller.  So after numerous searches, I've downloaded a selection of drivers for the Marvell 9230 controller.  Windows has recognised them as matching the hardware, but when I try to install them it kicks back saying "No new devices drivers were found..."

I'm now stuck in an endless loop and getting rather frustrated with the unit.

Any help greatly appreciated.

Tony

1 REPLY 1
Erdogan Temur
HPE Pro

Re: Microserver Gen10, SATA driver and Windows 2012 R2

Hello,

You can use the following driver for controller card.

https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1009955119&swItemId=MTX_5c0322f305a9405dbfef9869e7&swEnvOid=4184#tab1

Kind Regards,
Erdogan.
No support by private messages. Please ask the forum!

Accept or Kudo