ProLiant Servers - Netservers

Microserver Gen10 accidently disabled onboard graphics

 
SOLVED
Go to solution
Michael_Clarke
Occasional Contributor

Microserver Gen10 accidently disabled onboard graphics

Hi,

I seem to have accidently disable the onboard graphics in the BIOS settings in my Microserver Gen10.  Short of buying a graphics card to temporarily put in, is there anything I can do?

Any recommendations for the cheapest most basic graphics card that will work?  I assume any Radeon one will work?

Thanks

2 REPLIES 2
StorageMike
HPE Pro
Solution

Re: Microserver Gen10 accidently disabled onboard graphics

Hi

The Quickspecs https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00008701enw list the HPE AMD Radeon Pro WX2100 Graphics Accelerator as a supported GPU but looking on google it's not cheap.

You should be able to clear the bios - https://support.hpe.com/hpesc/public/docDisplay?docId=c05357220 page 66

I work for HPE

Accept or Kudo

Michael_Clarke
Occasional Contributor

Re: Microserver Gen10 accidently disabled onboard graphics

Thanks.  That did the trick....I have eyes now

I ordered a cheap old vga card from ebay anyways.  Thanks