HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

Microserver Gen8 with P222 results in high cooling fan speed

 
bucoops
Occasional Advisor

Microserver Gen8 with P222 results in high cooling fan speed

I believe this is a known issue, but with no known solution?

 

I have a Gen8 Microserver that I have installed a P222 controller - a valid option part. Yet since installing, the system fan has increased from <10% to a far too noisy 70%. The highest system temp is 57c for Sensor 10.

 

iLO version is 1.51 and system BIOS is version J06 06/06/14 which I believe are both the latest versions. OS is Server 2012 R2 Std.

 

How on earth can I get the fan down to an acceptable speed? It's ruining an otherwise good product.