I also posted this under Disk/Disk Arrays...
We are setting up 2 new ML350's, they are to be in a "fail-safe" setup using HP's StorageWorks Storage Mirror software...which is is about 0 docs for.
The issue:
Installed mirror software sees both source and target server, however it won't let me connect to target or source server through the mirror software ...says it can't authenticate me even though I'm logged into the server, and I'm listed in the Admin group by my username and our admin group. I've tried using the "my.domain\username" as well with no luck.
I had them setup using dhcp to start and have changed them to static IPs, I also have tried using their IP addresses with the same results.
I also turned on remote desktop.
