ProLiant Servers - Netservers

My first intallation Windows 2003 in Sata Raid type1.. some questions

 
FelixLatorre
Occasional Advisor

My first intallation Windows 2003 in Sata Raid type1.. some questions

I have Hp Proliant ML150 G2 recently Buyed with two new 250GB SATA Western Digital buyed with it.. yesterday i try to install windows but the sata is not the same as IDE.. I have configure the raid to 1 to miror.. then i place the cd of windows 2003 for installation but dont install beacuse dont recognise the sata raid..
I have read today some faqs .. my question is ..

What is the software that i have to used for the installation of the windows in this raid type mirror?And what is the difference?
Hp proliant ML150 G2 Embedded Sata Controller Windows Driver for Win 2003 or Hp 6-port sata raid controller driver for win 2003

And I prefere that you can explain me remember that a beginner in sata servers..
Thanks
1 REPLY 1
Juan Luis Trelles
New Member

Re: My first intallation Windows 2003 in Sata Raid type1.. some questions

You should look for that info in your user manual. I think the difference is the embedded is inside the chipset in the motherboard and the 6-port is a outer hardware