NETSERVER LH 3000 U and NETRAID/ Array Software

[Mossy]

On our other HP and Compaq there is usually NETRAID Assistant software or Array Configuration Software that provides on line status information about disks.

Does anybody know if there is any software for the above server I have had a look on the HP website but cannot seem to find any.


Thanks for any help you can provide

Mr-mossy

[Sean T. Craig]

Hi Mossy,

Certainly, the NetRAID Assistant is the correct software for most of the NetRAID Controllers (except for the 4M) so, if you're connected to the Integrated NetRAID Controller in the server, use the software at this link:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=50440&prodNameId=19611&swEnvOID=226&swLang=13&mode=2&taskId=135&swItem=ns-12645-1

Hope this helps,

Sean T. Craig Sr. C.E.T., M.C.P.

P.S. Please encourage participation in the support forums by assigning points to rate the value of the responses.