Need to remove a RAID 0 drive

[William Harrington_1]

I put a drive in a LH3 Netserver and set it as a stand alone drive RAID 0 to test the drive and added it in the disc manager as a "G" drive. The drive failed the next day.

I want to remove the drive but cannot find a way to delete it from the RAID array. It is seen as set #3.

I've select the configure view, add, or Delete but I don't seem to be able to Delete it.

Is there a function key for delete?

I know I'm missing something that is probably obvious?

[William Harrington_1]

I removed the hard drive and then set up the configuration in CONTROL + M and configured by did not initialize the drives. That removed the drive from the RAID configuration.

[William Harrington_1]

Resolved per previous comment