ProLiant Servers - Netservers

NetRAID on LH4R

 
Dennis Weikel
Occasional Advisor

NetRAID on LH4R

I have a NetRAID on an Netserver LH4R. I'm receiving the following warring at bootup:

DRAM = 16 M clustering = NOT supported

Should I be concerned?

I'm running Windows 2003.
2 REPLIES 2
kris rombauts
Honored Contributor

Re: NetRAID on LH4R

Hi Dennis,

no don't be woried, this is not an error message but just an informational message to indicate that the Netraid controller is not configured for clustering, if this message comes from the boot controller, this message is normal.


For Windows clustering with SCSI controllers, you always need to have a separate second controller for the shared bus.

If you are not planning on using clustering with another node, then don't worry.

PS: the LH4 is not supported with w2k3, only w2k.

HTH
Kris
Dennis Weikel
Occasional Advisor

Re: NetRAID on LH4R

Thanks for for your reply.