ProLiant Servers - Netservers

NetRaid boot message

 
SOLVED
Go to solution
CA1300632
Occasional Contributor

NetRaid boot message

Hi, I've never noticed the details of the NetRAID boot sequence, but I've just upgraded the RAM for the integrated NetRAID on our LH4 server. On boot I happened to notice:

DRAM = 64MB Cluster = not supported, I20 = Enabled

How do I interpret the middle bit - what is it that's not supported?

Thanks,
Paul
1 REPLY 1
kris rombauts
Honored Contributor
Solution

Re: NetRaid boot message

Hi Paul,

this is not an error message but just a indication that the build in Netraid card is not supported for clustering (Windows MCSC). This card simply does not support cluster configurations, for clustering solutions you need a PCI Netraid card plugged in to the system.

So no problem, this is a normal message.


HTH

Kris