NetRaid on LH4

 
Jaime Gomez
New Member

NetRaid on LH4

I have two LH4 servers and for motherboard problems in one of them, the server bios is not booting, I tried to load the Hard disks in the good one, but i dont know to configure netraid on the good one and i dont want to erase the info.
Please somebody help me with this...
2 REPLIES 2
BR759636
Valued Contributor

Re: NetRaid on LH4

The RAID configuration is stored on the disks and on the NetRAID controller.

During self test process you should see a message to press CTRL-M and some stuff about a configuration mismatch.

Press CTRL-M to enter the NetRAID setup utility.

Select View-Add configuration

You should get a message whether configuration should be read from disk or controller. Select from disk.

Check configuration.

Save configuration.

If you've got a 2nd drive cage you may have to enable NetRAID for 2nd SCSI channel first in system BIOS.
Jaime Gomez
New Member

Re: NetRaid on LH4

Thank you very much, you saved my life and my job..everything worked fine.
Thank you one more time..