NetServer RS/12 & Netware 5.x - 6.x

[CA1240254]

I recently bought (x3)NetServer RS/12 (Ultra2 SCSI 80MB/s card) and (x2)NetServer LH3r units and I need to know if the RS/12's are in any way compatible with Novell NetWare 5.x or 6.x? I have found various drivers for the LH3r units, but no mention of the RS/12's being compatable. Can anyone clarify whether or not I can use the RS/12's with NetWare. TIA

[kris rombauts]

Bill,

the RS12 is just a external disk enclosure and it is supported to be used as external storage on the Netraid controllers or build in SCSI controllers of the Netservers on different OS.

Just load the Netware drivers for your controllers in the LH3 and hook up the RS12 to one of them.

Here are the drivers for Netware for the build in Netraid array cointroller in the LH3:

http://tinyurl.com/3uu5y

HTH

Kris

[amhakassa]

Hi Bill,

Good Suggestion from Kris

I would liek to mention that the driver works for all raid controllers supported in LH 3r server excpet for the netraid 4M raid controller

Regards
Amha Kassa

[Kusuma]

Hi Kris,

I have replaced the long URL, you had posted with the TinyURL to retain the thread width.

Hope this is okay with you.

Thanks,
Kusuma