ProLiant Servers - Netservers

Netserver E-800 Beep Codes

 
Eric Crane
Occasional Contributor

Netserver E-800 Beep Codes

I get 4 short beeps spaced about a second apart. Nothing else. None of the beep code lists I've found list this. Does anyone have any ideas?
4 REPLIES 4
CA859951
Honored Contributor

Re: Netserver E-800 Beep Codes

Eric:

Do you get any video response? Anything on the screen?

4 short and no video sounds like System Timer failed. You would need to replace the M/B.

Hope this helps. -john
"Now is the only thing that's real!"
CA859951
Honored Contributor

Re: Netserver E-800 Beep Codes

Have you tried to bench the server?

Remove all but 2 DIMM and no PCI cards... just k/b RAM and video?
"Now is the only thing that's real!"
Eric Crane
Occasional Contributor

Re: Netserver E-800 Beep Codes

No video response. Everything except the RAM and Video are removed. What type of RAM does this MBoard use? Anything special?
Eric Crane
Occasional Contributor

Re: Netserver E-800 Beep Codes

I have an answer on the memory which may be the soulution to my problem. The Netserver E800 uses only ECC memory, not conventional ram.