ProLiant Servers - Netservers

Netserver E60 and SCSI Drives

 
Al Benton
New Member

Netserver E60 and SCSI Drives

Running low on storage and wanted to add a Maxtor 74GB drive. Drive is reconized fine in post but Adaptec scsi utility reads it as only 4GB. The OS (Netware 5.1) doesn't see it at all. Any help?
2 REPLIES 2
Nelson Doh
New Member

Re: Netserver E60 and SCSI Drives

Have u checked the Jumper settings on the Drive it could be that the drive has a set limit to it. Just my suggestion, I know some scsi's have that option. Put in a windows XP cd see if it reconized the drive and check the partition.
Al Benton
New Member

Re: Netserver E60 and SCSI Drives

Drive works fine when connected to Adaptec 29160 adapter.