Network Driver for NT

[Charles Peechumuthu]

Hello,
We have Proliant DL380 G2 running Windows NT server 4.0 SP6. I am moving that to DL380 G4. I have found the driver for Smart array 6i and I moved it to G4. Now everything is working fine except for NIC. I believe it is NC 7782 and there is no driver for it on hp site. I have no network !! Following link has no driver download, eventhough it says NT driver for NC7782
http://h18023.www1.hp.com/support/files/server/us/download/10789.html

Anyone can help finding the NIC driver for NT on DL380 G4 server

thanks
charles

[Tarek Kawach · Accepted solution]

Hi Charles:


NT4.0 is not really supported on the DL380G4; but since it is working that is great.

the NC7782 - is a 10/100/1000 card.
it is also Broadcom nic card (Q57).

check to see if Broadcom has a driver for it if the HP drive is not working.

DL380 G2-NC3163 (intel)
DL380 G3-NC7781 (Broadcom)
DL380 G4-NC7782 (Broadcom) same driver as G3
-

- before moving the NT4.0 to new server did you run the primer utility ; to remove the nic cards and teaming utility from MS.

- ftp://ftp.compaq.com/pub/softpaq/sp21501-22000/

- Search and Download sp21817.exe from ftp site above. - this is the driver for the NC7781 - Should work for NC7782 - since driver said it is for NC77xx.

- Best regards,

tarek.

[Tarek Kawach]

Sorry : it is SP21818.exe


Tarek.