OS installs on wrong array

[Greg McCauley]

I have an LH 3000 U3 with the HP Integrated NetRAID and an HP NetRAID 1M. The integrated controller goes to two 9GB drives configured in a RAID-1 array that is housed just under the CD-ROM. The NetRAID 1M controller has two channels, one is for two 18GB drives configured in a RAID-1 array, and the other channel is for five drives configured in a RAID-5 array. When I install the OS using the Navigator disk (v M.04.05), it installs the OS on the RAID-1 array on the NetRAID 1M. I would like to install the OS on the RAID-1 array on the integrated NetRAID controller. Does this install on that array by default because the NetRAID 1M controller is Adapter 0 and the integrated controller is Adapter 1?
I don't see anything that gives me a choice of where to install the OS?
How can I correct this?

[Greg McCauley]

Nevermind...BIOS...Boot Order.
DOLP!!!!!