ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

Open server 5 y discos sas.

Victor Zarate
Occasional Visitor

Open server 5 y discos sas.

buenas, tengo un servidor HP ML350 G5 con controlador E200i, con tres discos tecnologia sas, de 146Gb cada uno,cuando le instalo el sistema open server 5.0.7, y llego al punto de dar formato solo veo 18 gb, deberia tener en promedio 280gb. ya actualice el bios, y la tarjeta controladora. necesito alguna sugerencia.
Gracias
6 REPLIES
Venkatt...
Regular Advisor

Re: Open server 5 y discos sas.

Please post your question in English?

Thanks,
Venkatt

Regards,
Venkat
Prem Selvam Arumugam
Trusted Contributor

Re: Open server 5 y discos sas.

Victor,

Has configurado las arrays, reinicie el servidor, Presione F8 después de que la controladora E200i Inicialización de mensaje, elimine todos los arreglos actuales, Crear nueva arrays con RAID 5, salida, entonces comenzará la instalación.

-----------------------------------------------
Have you configured the Arrays, Restart the server, Press F8 after you see the E200i Controller Initializing message, Delete all the arrays present, Create New Array with RAID 5, exit, then you start you installation.
Victor Zarate
Occasional Visitor

Re: Open server 5 y discos sas.

Hello again, my English is not very good I hope I understand.

I have a ML350 G5 with E200i SAS raid controller and 3 x 146 Gb RAID5 disks.

I can install SCO OpenServer 5.0.7 with hpsas BTLD driver (from EFS 5.770a) but it only see a 19 Gb disk instead 280 Gb.

selvam prem with the F8 probe and the ML350 G5 if you see the correct amount in megabytes, you could give me more options to try please.
Note: My dual port disk drives are 146GB SAS 10k each
Thank you.
Victor Zarate
Occasional Visitor

Re: Open server 5 y discos sas.

I need any other idea please ......
Prem Selvam Arumugam
Trusted Contributor

Re: Open server 5 y discos sas.

Victor Zarate
Occasional Visitor

Re: Open server 5 y discos sas.

Hi guys,
1) I have an HP Proliant 350ML G5
2) Three SAS HDDs 146GB each.
3) Raid 5
3) Operating System OpenServer 7.0.5
Problem: The system only recognizes 18GB
Solution: In SmartStart interface, create the Logical Drive option, the option is activated MAX BOOT. OpenServer with it and can see the correct amount of hard drives.

Greetings
pd: Thanks for the help selvam prem