ProLiant Servers - Netservers

POST Error: 1777-Drive Array Detected Proliant Drive Subsystem Error

 
Alexand
Occasional Contributor

POST Error: 1777-Drive Array Detected Proliant Drive Subsystem Error

What does it mean?
Cables was replaced but nothing happens.
4 REPLIES 4
Ro_4
Occasional Advisor

Re: POST Error: 1777-Drive Array Detected Proliant Drive Subsystem Error

Alexand,

Which Controller are you using and in which server?

harisho schastye (How do you say it in ukrainian?)
Alexand
Occasional Contributor

Re: POST Error: 1777-Drive Array Detected Proliant Drive Subsystem Error

I'm using ProLiant Ml370 g3 server
and Smart Array 6402/ 128 ALL
You can see it in attached file.

harisho-garno
schastye-schastya

But what mean "harisho schastye" i dont know. Say it in english please
CA1272848
New Member

Re: POST Error: 1777-Drive Array Detected Proliant Drive Subsystem Error

I'm getting the same error on POST with a ML350 with a Smart Array 641. Any updates on a possible fix?

Bryan
CA1273036
New Member

Re: POST Error: 1777-Drive Array Detected Proliant Drive Subsystem Error

Check the system event log. I get this error entry on my DL 380 with a smart array 431.

Event Type: Error
Event Source: CPQDAEN
Event Category: None
Event ID: 4112
Date: 4/22/2005
Time: 7:49:46 AM
User: N/A
Computer: KMK_APPS
Description:
Sensor 1 of the Internal storage device on SCSI port 1 of the Compaq Smart Array Controller (in slot 2) is reporting the internal temperature has exceeded the preset limit. The controller may attempt to shut down power to the storage device and/or spin down the installed hard disk drives.
Data:
0000: 00 00 00 00 05 00 50 00 ......P.
0008: 00 00 00 00 10 10 35 e4 ......5ä
0010: 00 00 00 00 00 00 00 00 ........
0018: 02 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........

I obviously have either a sensor or heat proble