ProLiant Servers - Netservers

PROLIANT ML330 G3 server - fan's Failuer

Yossi L
Occasional Contributor

PROLIANT ML330 G3 server - fan's Failuer

Good Day,
I own ML330 G3 server

Unfortunately, the server is no longer under guarantee as it's 4 year old.

I noticed that the FAN which is located at the Power Supply's unit started to make some noises.
Today the system was shout down automatically due to the fan's failure.

As per yr knowledge & experiences, is it possible to replace only the Power supply's fan?
If so, what's the fan's P/N?
Is it Spare Part 176609-001?

If it's not possible or recommended,
Should I replace the hole unit:
Spare Part: POWER SUPPLY P/N 324714-001

Thanks for yr kind help
Yossi L
Occasional Contributor

Re: PROLIANT ML330 G3 server - fan's Failuer

I found a photo of the unit
The spec of P/N 324714-001

Model: Compaq - Power supply ( internal ) -AC 110/220 V - 300 Watt
Device Type Power supply - internal
Power Device
Load Rating Individual PC
Input Voltage AC 110/220 V
Input Voltage Margin ?? 10%
Frequency Required 60 Hz
Output Voltage +3.3, +5, +12 V
Power Provided 300 Watt
Compliant Standards EPA Energy Star

J P Montgomery
Occasional Contributor

Re: PROLIANT ML330 G3 server - fan's Failuer

The only fans that HP's sells for the ML370-G3 is the heatsync/fan assembly for the CPU chip and the system fan. This is the big fan right below the power supply If there's a fan inside the power supply thats faulty you would normally replace the supply. You could pry it open and get fan manufactures numbers off the fan and try to source it, but it's a lot of work.