ProLiant Servers - Netservers

ProLiant DL320 G3 - Hangs on Attempting to boot from Hard Drive (C:) during boot

 
Enrique Hernandez
Occasional Contributor

ProLiant DL320 G3 - Hangs on Attempting to boot from Hard Drive (C:) during boot

Hello guys,

Wondering if anyone can help me out. I've been trying to restore my ProLiant DL320 G3 (Server 2003) with a full image of the C drive that I made two months ago using Acronis Backup/Restore. After the restore completes, the server begins to boot up just fine, beeps twice (I'm assuming that that is the POST passing just fine), and then the system seems to hang on "Attempting to boot from Hard Drive (C:)"

The server has two hard drives, set up as RAID 1 (mirrored), each 160GB. When I boot up in Acronis to browse the volume, I see all of the data from the image there, but the server just doesn't want to boot into Windows.

Anybody have any suggestions on what I should do?
1 REPLY 1
Mark Matthews
Respected Contributor

Re: ProLiant DL320 G3 - Hangs on Attempting to boot from Hard Drive (C:) during boot

Is the BIOS setup to boot from the RAID controller?

---------------------------------------------------------------------------------
Please click the white Kudos star to the left if this post is helpful :)