ProLiant MicroServer Gen10+ : M2 SSD on PCI riser card?

[Albert25]

I have a HPE ProLiant MicroServer Gen10 Plus (E-2224, model no P16006-421)

I would like to make it boot from an SSD attached to a PCI adapter on the riser card (M.2 SSD?). I cannot find anything about that in the HP documentation.

Would someone know which adapter card and SSD cards would be compatible?

Thank you

[KevinSpringPM]

This is not a supported option, so you won't find such a card.

[AmRa]

Based on HPE ProLiant MicroServer Gen10 Plus quickspec, there is no M.2 SSD option available on HPE ProLiant MicroServer Gen10 Plus server.

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00073554enw

However you can use HPE Enterprise Mainstream Flash Media Kits for Memory Cards option for system boot.

HPE 32GB microSD RAID 1 USB Boot Drive P21868-B21

[brt02]

Firstly a disclaimer: It is not an officially supported configuration. So you are out of luck if it does not work.

But I have a Silverstone SST-ECM25 PCIe to NVMe M.2 riser working with a Samsung 960 Pro NVMe SSD.

I have not tried booting from it as it used as a cache drive in unraid, but it is detected in the UEFI and in iLO

[T-L]

I have a MicroServer Gen10 Plus E-2224.  I added a cheap NVME PCIe adapter., and boot from NVMe with no problem.

[Mrav]

I need to do the same, can you write me the procedure?