ProLiant MicroServer Gen8 keeps rebooting at 'Progress: 20%'

[Argonaught]

I have an HP ProLiant MicroServer Gen8. It's been working great for about a year and half.

I recently moved home and booted it up. Now, it takes about 10 minutes to get to 'Progress: 20%' on the 'Early system initialization, please wait....' screen.

Then, I hear a click, and it reboots. It's stuck in a loop like this.

Hope someone can help me!

[Jimmy Vance · Accepted solution]

Power off and unplug

Open unit and turn SW6 ON

Power unit up. Screen will say system has been reset (or something similar)

Power unit off and unplug
Turn SW 6 OFF

Close unit and boot normally. Refer to the maintenance and service guide for the location of SW6

[Argonaught]

Thank you Jimmy. That worked great.