ProLiant Servers - Netservers

ProLiant MicroServer Gen8 keeps rebooting at 'Progress: 20%'

 
SOLVED
Go to solution
Argonaught
Occasional Visitor

ProLiant MicroServer Gen8 keeps rebooting at 'Progress: 20%'

I have an HP ProLiant MicroServer Gen8. It's been working great for about a year and half.

I recently moved home and booted it up. Now, it takes about 10 minutes to get to 'Progress: 20%' on the 'Early system initialization, please wait....' screen.

Then, I hear a click, and it reboots. It's stuck in a loop like this.

Hope someone can help me!

2 REPLIES 2
Jimmy Vance
Honored Contributor
Solution

Re: ProLiant MicroServer Gen8 keeps rebooting at 'Progress: 20%'

Power off and unplug

Open unit and turn SW6 ON

Power unit up. Screen will say system has been reset (or something similar)

Power unit off and unplug
Turn SW 6 OFF

Close unit and boot normally. Refer to the maintenance and service guide for the location of SW6

No support by private messages. Please ask the forum! 
Argonaught
Occasional Visitor

Re: ProLiant MicroServer Gen8 keeps rebooting at 'Progress: 20%'

Thank you Jimmy. That worked great.