Problems installing 6 Port SATA raid on ML 150 G2

[CA1307760]

Hi all,

After pluging in and preparing an array ( CTRL-A and so on.. ) i tried to install the OS.
During the installation of windows i pressed F6 to force the setup-routine to show the "special drives" option.
Put the floppy with drivers in, selected the shown RAID controller and got an error message:
error in line xxxx at ..\oeminf.c

any suggestions, how to solve the problem?
Thanks in advance
christian

[Raj_75]

Can you create another driver diskette and try again?

[Oleg Koroz]

Firstly
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_CN0713W

Secondly re-configure Array from ROM
Use manual install with F6 and driver (extract to floppy).
http://h18023.www1.hp.com/support/files/server/us/download/22908.html

try as listed

[CA1307760]

Thanks all for your tipps - actual it was a defect driver disk, after creating a new one, all worked like it should :-))

Regards Chris