ProLiant Servers - Netservers
1753834 Members
8363 Online
108806 Solutions
New Discussion юеВ

Problems with ASR and ProLiant DL380 G5

 
M.Breitenbach
Occasional Advisor

Problems with ASR and ProLiant DL380 G5

Hello,
we have a lot of reboots the last few weeks.
We can see in the Integrated Management Log:
" ASR Detected by System ROM"

And we dont initiated these reboots.

i can take a look in the version control if it helps.
We have ILO Firmware 1.79
should we upgrade the drivers to
ProLiant Support Pack for Microsoft Windows Server 2003 x64 Editions version 8.30 (English (US), Japanese)

Our OS ist Windows Server 2003 Enterprise X64

Thank you !
2 REPLIES 2
Kedd Guyton
Respected Contributor

Re: Problems with ASR and ProLiant DL380 G5

Are there any events in the IML (Integrated Management Log) to describe the issue?

Is the BSOD / stop code logged in the Windows System log?
cwallis
Occasional Contributor

Re: Problems with ASR and ProLiant DL380 G5

upgrade the software to the lastest PSP.
We had similar issues on some Blade servers where the version of the ILO firmware and drivers caused ASR's quite regularly

took a bit of effort to sort out as the 8.30 psp wasn't out fully so had to match up components until it was stable but with 8.30 it will work fine