ProLiant Servers - Netservers

Problems with RAID Controller on DL360 G1

 
CA1367115
New Member

Problems with RAID Controller on DL360 G1

I re-loaded my old DL360 G1 2x800 and it was running great until I put the support paq (7.3) on the box which updated the firmware in the onboard RAID controller. Now when the server boots I get the following error: command failure cmd=11h "REQ FIFO NOT FREE" and Press F1 to continue. I've replicated this on another older DL360 with the same results.... Anyone know how to fix this so I can at least reboot the server remotely without having to visit my DC and press F1 every time? Thanks all - Chris :-)