ProLiant Servers - Netservers

Proliant 1600 problem when switching on

 
Razmi
Occasional Contributor

Proliant 1600 problem when switching on

Its been a tough day for me..need your guys help on this...

I administering one proliant 1600 server..when pressing the power switch the light comes on, all the fans power up, the lights on the drives come on... but all only for a second..and its repeats the task..

Its happen after i change the I/O Fan and do a bit cleaning..
3 REPLIES 3
CA1140313
New Member

Re: Proliant 1600 problem when switching on

I would suggest either System board or PSU failure. I take it you have checked all connections? Why did you need to change the fan? Does the old fan make any difference?
Razmi
Occasional Contributor

Re: Proliant 1600 problem when switching on

Already done as been advice by you but the error is still there..Is it norm to the Proliant to do such thing,i mean whenever there's a problem with the 1611 I/0 Fan Failure detected (as preventive action before the board become overheated)

I've change the fan but its not exactly the same the differnt is on the amp..the old one is 40amp the new one that i had change is 70amp the volt is the same..
Nazim_1
New Member

Re: Proliant 1600 problem when switching on

Is it possible if we bypass the 1611 error msg and boot up as normal?